AT10 White PU Open Ended Timing Belts

AT10 White PU Open Ended Timing Belts

AT10 white PU Open Ended Timing Belts Specifications 1. Good stability 2. Impact resistance 3.Good performance 4.Long service life. 5.great drawing ability Specification: Parameters: Nominal pitch: 10mm Steel wire polyurethane synchronous belts Trapezoidal-shaped teeth as per DIN 7721 T1...

Description

banner.jpg


AT10 white PU Open Ended Timing Belts


Specifications

1. Good stability 
2. Impact resistance 
3.Good performance 
4.Long service life. 
5.great drawing ability 

Specification:

Parameters:

Nominal pitch: 10mm

Steel wire polyurethane synchronous belts

Trapezoidal-shaped teeth as per DIN 7721 T1 standard.

It is most applicable to high flexible drive application.

With comparably high axial and angular accuracy, it is widely used in linear drive  and small power transmission.

 

Tolerance:

Tolerance of the width :±0.5(mm)

Tolerance of the length:±0.5(mm/m)

Tolerance of the thickness:±0.2(mm)

 

Technical parameters:

Width(mm)

16

25

32

50

75

100

Rated load of opening belts(N)

2180

3890

4760

7760

11780

14750

Maximum load of thermoweld belts (N)

1090

1945

2380

3880

5890

7375

Breaking load of  opening belts(N)

9480

15470

19800

32440

49650

65860

Weight(kg/mm)

0.09

0.14

0.18

0.30

0.43

0.58

 

 

 

Material: PU

Detailed description:

1. Thermoplastic polyurethane timing belt from the opening material, with high wear resistance. Ensure all types of wire core is still in the high-load transmission good running ability.

2. Production tolerance of small, reliable transmission and has a dimensional stability. The production process or in the teeth and tooth add a layer of nylon to ensure that applications running in the special characteristics of the same. Also thicker layer of polyurethane in the belt or the back of the red plastic to prevent corrosion or high load.

3. Open (PU) belt made by the themoplastic polyurethane material with high wear resistance. Ensure all types of wire core is still in the high-load transmission good running ability.

4. Production tolerance.Drive, reliable and dimensional stability. The production process in the tooth surface or teeth and add a layer of nylon to ensure that applications running in the special characteristics of the same. Also thicker layer of polyurethane on the back of the belt to prevent corrosion or high load.

5. Open (PU) belt has the following properties: Mechanical properties-Dimensional stability-pre-tension low-low noise-highly resistant to wear -no maintenance-elastic good -highly accurate straight-straight line speed of up to 80m/sec and chemical properties aging, water solution, UV UVA, anti-acid and alkali corrosion with other thermoplastic materials combination.

6. Opening opening band finished with a continuous length, the middle and the sides parallel to the wire core. Standard roll length is 50 or 100 meters.

7. Open(PU) leather belt with a variety of different core option, such as kevlar core, highly flexible core(HF) high-perdormance (HP) and high performance and high toughness(HPF). 


94at10.jpg


135at10.jpg

工厂图.jpg


If our at10 white pu open ended timing belts caters to your requirement, welcome to buy the low price and quality belt from our factory. As one of the leading China belt manufacturers and suppliers, we must be your best choice.

Related Products

Feedback

Products List